Boro3.3 Glass Beaker with Graduation 150ml
It is a common measuring device used to measure liquid volume in the laboratory. The cylinder wall is engraved with a volume range for users to read the volume. Maximum measured volumes range from several milliliters to several liters. The cylinder wall is marked from bottom to top, and the measuring cylinder of different specifications has different degrees. It's mostly made of glass, but some of it's made of plastic. The purpose is to take liquid quantitatively by volume, but do not mix reagents in the measuring cylinder, chemical reaction. Measuring cylinder can be divided into ordinary measuring cylinder and plug measuring cylinder according to the shape.
We will continue to devote ourselves to the research and development ofPlastic 5000ml Beaker,0 5ml Microcentrifuge Tube,PP Plastic Test Tube 13x75mmand provide customers with innovative and reliable products. We are always self-examining with extremely high standards, not easily slacking off, and continuously developing innovative capabilities. The implementation of our company's salary management system improvement plan plays a certain supporting role in our company's development strategy, the improvement of the quality of the company's employees and the construction of the company's corporate culture. The company invested a lot of money to establish a modern high-performance production line to achieve mass production.
Introduction:
It is a common measuring device used to measure liquid volume in the laboratory. The cylinder wall is engraved with a volume range for users to read the volume. Maximum measured volumes range from several milliliters to several liters. The cylinder wall is marked from bottom to top, and the measuring cylinder of different specifications has different degrees. It's mostly made of glass, but some of it's made of plastic. The purpose is to take liquid quantitatively by volume, but do not mix reagents in the measuring cylinder, chemical reaction. Measuring cylinder can be divided into ordinary measuring cylinder and plug measuring cylinder according to the shape.
Feature:
1. Color:Transparent clear
2. Material: Boro glass
3.Packing:120pcs/ctn.96pcs/ctn.48pcs/ctn.24pcs/ctn.12pcs/ctn
4. Application:Laboratory filtration
Code |
Material |
Sub.Division(ml) |
Capacity(ml) |
Height |
1601-5 |
Boro3.3 |
0.1 |
0.1 |
110 |
1601-10 |
Boro3.3 |
0.2 |
0.2 |
135 |
1601-25 |
Boro3.3 |
0.5 |
0.5 |
160 |
1601-50 |
Boro3.3 |
1.0 |
0.5 |
195 |
1601-100 |
Boro3.3 |
1.0 |
1.0 |
250 |
1601-250 |
Boro3.3 |
2 or 5 |
2.0 |
300 |
1601-500 |
Boro3.3 |
5.0 |
5.0 |
350 |
1601-1000 |
Boro3.3 |
10.0 |
10.0 |
430 |
1601-2000 |
Boro3.3 |
20.0 |
20.0 |
500 |
Details:
Using:
1.A cylinder is often used to measure the volume of a liquid. A cylinder can measure the volume of a liquid more accurately than a beaker or flask, but a pipette can measure it more accurately. For quantitative experiments, volumetric bottles or pipettes with high accuracy will be used. Measuring cylinders can also sometimes be drained to measure the volume of solids.
2.It must be cleaned before use, and after drying, the solution should be injected to an appropriate scale line below the required capacity, and the volume should be fixed with a rubber head dropper. The solution should be slowly poured out of the mouth as it is poured out of the barrel, and finally the barrel is in contact with the wall of the holder to remove the final solution.
3.有时缸并非完全干燥fore use. You can use blotting paper to dry the cylinder by taking a piece of blotting paper longer than the length of the cylinder and folding it several times until it fits into the cylinder. Then insert the cylinder and move it up and down several times to absorb the liquid on the inner surface of the cylinder. Do not try to dry the cylinder with compressed air, the water will not evaporate quickly and the compressed air contains a small amount of oil.
Question&Answer:
1. How about the delivery time?
Sample for free,it will arrive at destination within 3-7 days by DHL FEDEX UPS.
Small quantities,it will arrive at destination within 5-10 days by air.
Large quantities,it will arrive at destination within 25-35 days by sea.
2. Where are your manufacturer?
Our factory is local in Chongqing.
With the aid of professional and perfect test support, we ensure the stability and excellent quality of the Boro3.3 Glass Beaker with Graduation 150ml so that make us occupy the leading position in the industry. We actively seize opportunities in the midst of change and strive to achieve progress while seeking newness. Based on scientific theory, we manage the value of our company with reasonable and effective analysis methods.
-
Lab Capacity 1ml~100ml Glass Measuring Pipette with ...
-
Ce/ISO Approved Medical Non-Woven Sterile Alcohol Swab
-
工厂抗原提取Rna / DNA测试管PCR...
-
Gilson Filter Tips Rainin Filter Tips Pipette Tip Rack
-
Custom Cheap Blue Powder Free Disposable Nitrile Exa...
-
Laboratory Glassware Polished Microscope Glass Slide...
Send Inquiry